Juice & Tea Glass Bottle Filling Machines

Hot & fast

Throughput that survives acid and sugar

Juice and tea are the high-volume glass bottle categories — and the engineering requirement differs from wine.

The line must run hot-fill or warm-fill regimes, keep throughput stable across long shifts, and survive the acid and sugar load of real fruit juice. Our CGF and HD monoblocks rinse, fill and cap in a single frame from 6,000 to 16,000 BPH — capacity chosen from your annual volume, not negotiated, with a small change-part kit between bottle formats.

Juice & Tea Machines

Each model has its own section and permalink anchor for quote references.

Glass Bottle Juice Rinsing–Filling–Capping 3-in-1 Machine

Hot-fill capable 3-in-1 monoblock for fruit juice and tea beverages in glass bottles, with PLC-controlled operation.

6,000 BPH · CGF18-18-6

8,000BPH · CGF24-24-8

16,000BPH · CGF40-40-12

Good to know

The CGF series covers mainstream glass juice throughput in three proven steps: 6,000 BPH for one-shift starter lines, 8,000 for two-shift, 16,000 for export volume.

Well thought out

CGF18-18-6 runs on 4.5 kW in a 2600 × 2000 × 2450 mm frame; larger variants keep the same rinse–fill–cap architecture with more heads.

Convincing

Capacity is chosen, not negotiated — three documented configurations with power and footprint numbers you can plan the building around.

Hot-fill capable
PLC controlled
18 rinse / 18 fill / 6 cap
One-frame monoblock

Full specifications

Model	CGF18-18-6
Output	6,000 BPH
Total power	4.5 kW
Dimensions	2600 × 2000 × 2450 mm
CGF24-24-8	8,000 BPH · 5.5 kW · 3100 × 2300 × 2450 mm
CGF40-40-12	16,000 BPH · 4200 × 2600 × 2450 mm

Tea & Drink Hot-Fill 3-in-1 Filling Machine

Hot-fill monoblock for tea and functional drinks in glass bottles; rinsing, filling and capping in one frame.

32 / 32 / 16 rinse · fill · cap stations

Good to know

The HD32-32-16 platform brings a higher station count — 32 rinsing, 32 filling, 16 capping — into one frame for tea and functional drinks at scale.

Well thought out

The model name itself states the configuration, so line planning starts from a known geometry rather than a quotation negotiation.

Convincing

Same monoblock family as the CGF series: shared engineering, shared spares, documented changeover between bottle formats.

Hot-fill monoblock
Tea & functional drinks
One-frame rinse-fill-cap
Model HD32-32-16

Full specifications

Model	HD32-32-16
Configuration	32 rinsing / 32 filling / 16 capping stations

Not listed? Detailed data sheet available on request.

Juice & Tea Filling Questions

What is hot filling and do I need it?

Hot filling doses product at 85–92 °C into the bottle, which pasteurises the headspace and inner wall so the juice or tea stays stable without aseptic technology or cold chain. If your product is acidified (most juices and teas), hot fill is the standard route — if it is a neutral beverage, you need aseptic or post-pasteurisation instead and the machine selection changes.

How do I size the monoblock — CGF18, CGF24 or CGF40?

Work backwards from annual volume: 6,000 BPH is a natural fit for one-shift operation with margin, 8,000–16,000 BPH suits two-shift or export volumes. The head count (rinse/fill/cap) has to match bottle diameter too — a short run of large-format bottles may suit fewer, gentler heads.

Can one line run orange juice, green tea and a functional drink?

Yes, with a CIP station and a change-part kit for bottles and closures. Our monoblock design keeps the fill valve platform product-agnostic; pulp-heavy recipes add a piston option. Tell us the product family and we specify the valve set.